Harness

Anything to do with the MX5 and Motor Sport

Moderators: timk, Stu, zombie, Andrew, -alex, miata

Post Reply
khchu

Harness

Postby khchu » Sat May 12, 2007 11:26 pm

Where is a good place to mount a 4/6 point harness?

Do they have to meet cam requirements?
Top
User avatar
Brad
Racing Driver
Posts: 613
Joined: Fri Aug 29, 2003 11:00 am
Vehicle: ND - 2 GT
Location: Brisbane
Contact:
Contact Brad

Postby Brad » Sat May 12, 2007 11:51 pm

I've got a 4 point RPM harness. The bottom two straps are hooked into CAMS spec eye bolts which are screwed into the seatbelt bolt hole down behind the seat on the outside of the car, and the other into the seat belt rail hole on the inside. The rears are hooked into two more eye bolts which are drilled through the Brown Davis roll bar, through the parcel shelf and secured underneath with CAMS spec backing plates with captive nuts.
1994 MX5 Clubman - RB CAI & ARB - BD Rollbar - X-Force headers & Zorst - Tein SS
Image
Top
khchu

Postby khchu » Mon May 14, 2007 1:55 am

Do u got any picture of it? would be interested to see how u mount the rear
Top
User avatar
CT
Racing Driver
Posts: 1418
Joined: Thu Apr 24, 2003 11:00 am
Vehicle: NB SP
Location: By the lake...
Contact:
Contact CT

Postby CT » Tue May 15, 2007 5:06 pm

Do not fit a harness unless you have at least a half cage. No point fitting a device designed so you can't duck unless you have the cage to stop you from having to duck. Also, you can purchase the brown davis with mountings built in for the eye bolts. 8)
2006 Z06 Corvette - 650hp of wow!
Top
Post Reply

Return to “MX5 Motor Sport”

Who is online

Users browsing this forum: No registered users and 172 guests