Page 1 of 2
NC loan car for testing Western Sydney
Posted: Sun Nov 16, 2014 10:34 pm
by ansellpa
Hi all,
I appreciate this might be a long shot, but I was hoping there might be a willing nc owner who would be prepared to loan their car to Haltech for a week or so in order to assist in development of their new Elite ECU.
My car is a race car and I am located in Brisbane. Haltech did some development work to make the new Elite a plug and Play for the NC. They used my car and it now runs very nicely with increased hp and safer tune than a previous reflash. The only issue needing to be resolved is the communications with the ABS brakes.
All of the dyno work and setting has been done on mine, but Haltech require a road registered NC to try to sort the issue. The car would most certainly not be misused in any way.
Please PM me if you are willing to help out!
They are located in Wetherill Park
Cheers
Paul
Re: NC loan car for testing Western Sydney
Posted: Mon Nov 17, 2014 8:51 am
by Regie
Whats in it for the car owner??
These new PnP Ecu's are going to be a good breakthrough for the NC's
Re: NC loan car for testing Western Sydney
Posted: Mon Nov 17, 2014 9:23 am
by ansellpa
haha, the feelgood factor of being part of evolution?
Case of exotic beer??
PMS replied!
thanks all
Re: NC loan car for testing Western Sydney
Posted: Mon Nov 17, 2014 9:39 am
by Novice1
What sort of power did it make on your race NC.
Novice1
Re: NC loan car for testing Western Sydney
Posted: Mon Nov 17, 2014 5:04 pm
by greenMachine
Interesting.
These are wired as full ECU replacements, not piggys?
Re: NC loan car for testing Western Sydney
Posted: Tue Nov 18, 2014 8:30 am
by Sailor
greenMachine wrote:Interesting.
These are wired as full ECU replacements, not piggys?
Yep, It even learns like the OEM
http://www.haltech.com/the-haltech-elit ... roduction/
Re: NC loan car for testing Western Sydney
Posted: Tue Nov 18, 2014 2:10 pm
by ansellpa
I will get dyon results up in the next few days.
Mine is wired in as a standalone and uses the same connectors as the stock ECU, so I presume Haltech will be looking to offer it as a direct plug in.
It looks very promising!
Re: NC loan car for testing Western Sydney
Posted: Sat Nov 22, 2014 3:02 pm
by Novice1
Dyno results ?
Novice1
Re: NC loan car for testing Western Sydney
Posted: Wed Nov 26, 2014 10:16 am
by Novice1
Nov 18 quote, I will get dyno results up in the next few days. Yawn.
Novice1
Re: NC loan car for testing Western Sydney
Posted: Thu Nov 27, 2014 9:19 am
by ansellpa
Sorry for the delay,
Just got these from the mechanic yesterday.
Lowest one is Headers and intake, stock ECU
Next is + generic reflash
Top one is + Haltech Elite Custom Tune on Dyno
Re: NC loan car for testing Western Sydney
Posted: Thu Nov 27, 2014 5:03 pm
by Novice1
So 140 hp or 104 kw. My car with Mx5 plus extractors and rear muffler currently makes 103.8 kw atw.
Wonder how many more ponies I could manage with Haltech Ecu.
Novice1
Re: NC loan car for testing Western Sydney
Posted: Thu Nov 27, 2014 5:23 pm
by OurCognitiveSurplus
Interesting. Any idea on the price?
Re: NC loan car for testing Western Sydney
Posted: Thu Nov 27, 2014 6:24 pm
by Novice1
$2,895 for the Haltech Elite.
Novice1
Re: NC loan car for testing Western Sydney
Posted: Thu Nov 27, 2014 7:28 pm
by ansellpa
Plus cost of dyno tuning time of course.
The extra midrange is what I need on the track at present.
Power does drop off at higher rpm but hopefully won't be an issue.
Once I get the engine built I would hope to have 180+ hp at the wheels and even better midrange.
Re: NC loan car for testing Western Sydney
Posted: Thu Nov 27, 2014 11:20 pm
by Regie
Makes a 2.5l conversion great value
