Page 1 of 1
Self-servicing, borrow a jack?
Posted: Tue Apr 08, 2014 6:41 pm
by smy0003
No, not that kind of self-service and jack...
Took my car to Phillip Island sprints on Sunday so I think I'll whack some fresh oil in it.
I have the Haynes manual and the Mazda service manual, any other things particular to the 5 that I should watch out for?
I don't have a jack or stands at the moment, would any one in Melb be kind enough to let me borrow theirs for a w/e morning for a six pack and some good karma?
Re: Self-servicing, borrow a jack?
Posted: Tue Apr 08, 2014 8:53 pm
by hks_kansei
You can buy a trolley jack for the price of a decent six-pack.
Just go to Supercheap/Bursons/AUtobarn/Repco and there should be something cheapish.
I had a yellow chinese jack, no brand name at all, just one single Australian Standards sticker (which may have been fake)
It served me well for about 6 years, and multiple cars.
Jack stands, can be had for about $50 a pair.
Re: Self-servicing, borrow a jack?
Posted: Tue Apr 08, 2014 9:02 pm
by taminga16
Repco are offering this package in their "Easter Sale" for $49.00
Greg.
Re: Self-servicing, borrow a jack?
Posted: Tue Apr 08, 2014 9:16 pm
by smy0003
Thought I went through the big three's sales with a fine toothed comb, this must've snuck through.
Thanks taminga16
Re: Self-servicing, borrow a jack?
Posted: Tue Apr 08, 2014 9:17 pm
by smy0003
Front page as well...
Re: Self-servicing, borrow a jack?
Posted: Tue Apr 08, 2014 10:13 pm
by taminga16
smy0003 wrote:Thought I went through the big three's sales with a fine toothed comb, this must've snuck through.
Thanks taminga16
Cheers Mate,
You may find that you will need some timber blocks to drive onto, lower profile jacks are considerably more expensive. Take care as to where you place the jack, the centre of the diff is OK as is the front cross member, but a lot of under the front of the car looks the same. If in doubt ask someone.
Greg.
Re: Self-servicing, borrow a jack?
Posted: Wed Apr 09, 2014 6:24 am
by Magpie
This is a very good guide for jacking/stand placement
http://www.metzair.com/downloads/Raise_Your_Miata.pdf